If you are looking for the most complicated ceramic art , then Babs Haenen her objects will be in the top three.
The first time i encountered work by Babs Haenen was when the Haags Gemeentemuseum has bought two vases for its collection. What struck me was that these vases had very delicate colors and were looking not like the ordinary ceramics from the collection. They looked like sculptured vases . Her method of building a vase is simple. Porcelain clay is coloured with pigments and afterwards rolled out into thin sheets. The choice of porcelain clay is dictated by the wish to be able to produce bright colours. The basis for a piece at work is made by cutting up the different coloured sheets and joining them together again in various patterns.
Round a plaster core is placed a thin piece of textile, which serves to prevent the clay from sticking to the core. The core is then inverted and the sheets of clay are draped around the textile.This is done from the bottom, so that at first the pot is shaped upside down.
When the piece has reached a given height, it is removed from the core. a short drying period and then built up further the right way up. At that point it has often not yet reached half its eventual height. Hence the form at the plaster care only determines the final form of the pot to a very minor extent.
Between the additions at new sheets of clay the piece is dried with a hairdryer, so that the form soon acquires a degree of certainty. In its further built-up a great freedom prevails in respect of designing by distorting and modelling.
After being thoroughly dried, the pieces are given a biscuit firing, then glazed and given repeated reduction firings in a gas kiln at a temperature of 1260 C.
The above text comes from the book which is now available at www.ftn-books.com